10Hz-1kHz Vibration Sensors OVS-10H-1K
10Hz-1kHz Vibration Sensors OVS-10H-1K
10Hz-1kHz Vibration Sensors OVS-10H-1K
10Hz-1kHz Vibration Sensors OVS-10H-1K

10Hz-1kHz Vibration Sensors OVS-10H-1K

Geofon & Vibration Sensor for NF-5030 Spectrum Analyzer incl. SMA connector. Sensitive and wide frequency range down to 10Hz.Perfect for vibrationmonitoring.

 

The highly sensitive vibration sensors of the  GEO series offer a surprisingly high sensitivity over a wide frequency range down to 10Hz (4Hz). 
They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits.
In addition to regular monitoring, thanks to their high sensitivity, these probes can also be used as geophone to measure ground motion (displacement).

Model：
Maximum：-


send inquiry1
Description

Geofon & Vibration Sensor for NF-5030 Spectrum Analyzer incl. SMA connector. Sensitive and wide frequency range down to 10Hz.Perfect for vibrationmonitoring.

 

The highly sensitive vibration sensors of the  GEO series offer a surprisingly high sensitivity over a wide frequency range down to 10Hz (4Hz). 
They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits.
In addition to regular monitoring, thanks to their high sensitivity, these probes can also be used as geophone to measure ground motion (displacement).
In conjunction with our SPECTRAN 5030 Spectrum Analyzer and our free analyzer-software "LCS" or "MCS", the entire frequency range between 10Hz (4Hz) and 1kHz can be analyzed, monitored and documented. Long-term recording for days or even weeks is not a problem at all, either. 
These sensors are equipped with a 1m SMA cable (similar with the one used with our test-antennas), allowing direct connection to the high-sensitivity signal input of our NF-5030 EMC-Analyzer.

 

All vibration sensors are developed, individually produced and calibrated. This guarantees highest standard so that we can offer every customer a full 3 years warranty for all GEO vibration sensors.

 


Examples for possible analysis and measurements within frequency range (10Hz - 1kHz):

· Earth vibration

· Vibration of machines, electronic devices etc.

· Monitoring of level or vibration limits

 

Technical data

 

 

Design

Vibrationsensor/Geofon

Natural frequency

14Hz

Frequency range

  10Hz-1kHz (typ.)

Sensitivity

 28.8 V/m/s

Accuracy

 +/-5%

Typical spurious frequency

 190Hz

Coil impedance

 375 Ohm

Connector

 SMA (m)

Dimensions (D/H)

25.4x32mm

Weight

 74g

Warranty

 10 years

 

Additional information

Design Vibrationsensor/Geofon
Natural frequency 14Hz
Frequency range   10Hz-1kHz (typ.)
Sensitivity  28.8 V/m/s
Accuracy  +/-5%
Typical spurious frequency  190Hz
Coil impedance  375 Ohm
Connector  SMA (m)
Dimensions (D/H) 25.4x32mm
Weight  74g
Warranty  10 years