4Hz-1kHz Vibration Sensors OVS-4H-1K
4Hz-1kHz Vibration Sensors OVS-4H-1K
4Hz-1kHz Vibration Sensors OVS-4H-1K
4Hz-1kHz Vibration Sensors OVS-4H-1K

4Hz-1kHz Vibration Sensors OVS-4H-1K

Vibrationsensor & Geofon for NF-5030 Spectrum Analyzer. Very sensitive and wide frequency range down to 4Hz. Perfect for monitoring machinery vibrations.


The highly sensitive vibration sensors of the GEO series offer a surprisingly high sensitivity over a wide frequency range down to 10Hz (4Hz). 
They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits.
In addition to regular monitoring, thanks to their high sensitivity, these probes can also be used as geophone to measure ground motion (displacement).


Model：
Maximum：-


send inquiry1
Description

Vibrationsensor & Geofon for NF-5030 Spectrum Analyzer. Very sensitive and wide frequency range down to 4Hz. Perfect for monitoring machinery vibrations.


The highly sensitive vibration sensors of the GEO series offer a surprisingly high sensitivity over a wide frequency range down to 10Hz (4Hz). 
They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits.
In addition to regular monitoring, thanks to their high sensitivity, these probes can also be used as geophone to measure ground motion (displacement).
In conjunction with our SPECTRAN 5030 Spectrum Analyzer and our free analyzer-software "LCS" or "MCS", the entire frequency range between 10Hz (4Hz) and 1kHz can be analyzed, monitored and documented. Long-term recording for days or even weeks is not a problem at all, either. 
These sensors are equipped with a 1m SMA cable (similar with the one used with our test-antennas), allowing direct connection to the high-sensitivity signal input of our NF-5030 EMC-Analyzer.


 

All vibration sensors are developed, individually produced and calibrated. This guarantees highest standard so that we can offer every customer a full 3 years warranty for all GEO vibration sensors.


Examples for possible analysis and measurements within frequency range (4Hz - 1kHz):

· Earth-Vibration

· Vibration of machines, electronic devices etc.

· Monitoring of level or vibration limits

 

 

Technical data

 

Design

Vibrationsensor/Geofon

Natural frequency

8Hz

Frequency range

  4Hz-1kHz (typ.)

Sensitivity

 28.8 V/m/s

Accuracy

 +/-5%

Typical spurious frequency

 160Hz

Coil impedance

 375 Ohm

Connector

 SMA (m)

Dimensions (D/H)

25.4x36mm

Weight

 82g

Warranty

 3 years

 

Additional information

Design Vibrationsensor/Geofon
Natural frequency 8Hz
Frequency range   4Hz-1kHz (typ.)
Sensitivity  28.8 V/m/s
Accuracy  +/-5%
Typical spurious frequency  160Hz
Coil impedance  375 Ohm
Connector  SMA (m)
Dimensions (D/H) 25.4x36mm
Weight  82g
Warranty  3 years